Babi Italia Parkland Convertible Crib Assembly Instructions Better ((top)) -

This is the most critical step for safety. The "cradle" or "tabs" of the spring should face upward to ensure the mattress sits flat.

Following these refined assembly steps and safety checks helps maintain the Parkland crib as a secure and stable environment for a child.

Thread the long bolt through the headboard and into the side rail. Tighten only halfway—leaving things a bit loose makes it easier to align the other parts. Repeat for the second side rail. Step 2: Connect the Footboard This is the most critical step for safety

Maintaining a safe sleep environment is the highest priority. Please observe the following precautions:

Usually included, but a standard metric set will work. Flat-head Screwdriver: For aligning the barrel nuts. A Partner: Crib panels are heavy and awkward to hold alone. Parts Identification: Headboard: The tallest solid panel. Footboard: The shorter front panel. Side Rails (2): The two identical slatted sides. Mattress Support Spring: The metal grid frame. Thread the long bolt through the headboard and

Position the crib away from windows, cords, drapes, or any objects that a child could reach or pull into the sleep area.

Lay the Headboard flat on the floor or lean it against a wall. Align one Side Rail so that the pre-drilled holes match the inserts on the headboard leg. Step 2: Connect the Footboard Maintaining a safe

Master Your Nursery: Babi Italia Parkland Convertible Crib Assembly Guide

With the mattress support securely attached, proceed to tighten all bolts throughout the frame. It is important to ensure each connection is firm to prevent wobbling, but avoid over-tightening, which can damage the wood or the hardware threads. Once tightened, give the crib a firm shake to confirm that the structure is rigid and stable. Conversion Overview: Transitioning to a Toddler Bed