Casio W-800h Mod __top__ -

: This involves peeling off the original polarizing film from the LCD and replacing it with a new film rotated at a 90-degree angle. This turns the screen black with light-colored digits. N-O-D-E

: If not done perfectly, air bubbles can form, or the oil may eventually leak and ruin the buttons or the gasket. 4. External Upgrades: Straps and Protection casio w-800h mod

: Before reassembling, use tweezers to short the point marked "AC" and the positive side of the battery for two seconds. This "reboots" the software to recognize the newly enabled feature. YouTube : This involves peeling off the original polarizing

: Unclip the metal cage holding the LCD to the circuit board. You may need to flip the PCB over to see the traces. YouTube : Unclip the metal cage holding the

: Use your soldering iron to heat the blob and wick it away. Alternatively, some modders carefully scrape the bridge away with a sharp hobby knife, though this carries a higher risk of damaging the board.

or a copper braid (optional, to help remove excess solder). Tweezers for handling small components. Step-by-Step Instructions