Deutsche Technologies Rv3 Digital Satellite Finder Manual |top| «ULTIMATE - OVERVIEW»

Turn the knob until the LCD display shows a reading of roughly .

Slowly move your dish horizontally (azimuth). Watch the RV3 display: deutsche technologies rv3 digital satellite finder manual

If the reading hits 99%, lower the sensitivity knob back down to 50% and continue fine-tuning. This allows you to find the "peak" of the signal. Turn the knob until the LCD display shows

Heavy rain or thick clouds can dampen signal strength. Try to calibrate on a clear day if possible. deutsche technologies rv3 digital satellite finder manual

Connect a short jumper cable (coaxial) from the LNB on your satellite dish to the port on the RV3 marked "TO LNB."

As you hit a satellite, the percentage will jump and the audible tone will get higher.