Device type (e.g., 1 or 3 for standard RS-232 devices). 5111: Stop bits (typically set to 1 or 2). 5112: Baud rate (e.g., 10 for 4800, 11 for 9600). 2. Servo and Axis Control (1000–2500)
These settings manage the main spindle motor and tool offsets. fanuc 11m parameter list
These parameters manage the basic interface and RS-232 communication settings for DNC or program transfers . Basic settings like ISO/EIA code selection. Device type (e
Before you can modify most parameters, you must enable "Parameter Write." Device type (e.g.
Push the SETTING soft key, find parameter 8000 , and set bit #0 (PWE) to 1 . A "Parameter Write Enable" alarm will appear; this is normal and expected.