Install |work| | Http V515

The "http://v515install" URL is a critical web-based interface used to set up the Alarm.com ADC-V515 1080p Indoor Wi-Fi Camera Go to product viewer dialog for this item.

Using a smartphone or computer, search for available Wi-Fi networks. Connect to the network named , where "XX" represents the last six characters of the camera's MAC address. 3. Access the Configuration Portal

: An active Alarm.com account with a service package that supports video. http v515 install

: Perform the setup near the camera's final location to ensure a strong Wi-Fi signal. Step-by-Step Installation Guide via http://v515install 1. Power On the Camera

: A 2.4 GHz Wi-Fi connection. Note that the does not support 5 GHz networks. Step-by-Step Installation Guide via http://v515install 1

Follow the on-screen instructions in the portal to scan for and select your home's 2.4 GHz Wi-Fi network. Enter your network password when prompted. The camera's LED will turn once it has successfully connected to the internet. 5. Add the Camera to Your Alarm.com Account

Open a web browser on the same device and enter http://v515install or http://v515install.com into the URL field. This will launch the camera's internal setup page. 4. Join Your Home Wi-Fi http v515 install

With the camera online (solid green LED), you must link it to your security account: 1080p Indoor Wi-Fi Camera Installation Guide - Surety

. This address allows users to connect their camera to a local 2.4 GHz Wi-Fi network when using Access Point (AP) mode. Pre-Installation Checklist