Huawei Flash Tools Idt 20 Work -

Open Windows . Under Ports (COM & LPT), it should read: HUAWEI USB COM 1.0 (COMX) . Step 3: Configure IDT 2.0 Launch the IDT.exe application as an Administrator . Click the Gear icon (Settings) in the top menu of the tool.

While holding the tweezers in place, connect the phone to your computer using a USB cable.

Flashing the basic board software via IDT 2.0 restores the phone's low-level boot loader, meaning is now accessible again. However, the phone is not yet ready for daily use. To fully restore the device: Put the phone into Fastboot mode . huawei flash tools idt 20

Use a flashing program like the or your preferred service tool to flash the full consumer EMUI or HarmonyOS firmware.

Select the correct that matches what you saw in Device Manager. Step 4: Flash the Device Open Windows

Flashes raw factory images ( Factory ROMs ) to restore damaged partitions.

Once the progress bar reaches 100% and displays , disconnect the phone from the PC. ⚡ Next Steps After Using IDT Click the Gear icon (Settings) in the top menu of the tool

Detects and flashes firmware using the USB COM 1.0 interface via test point.

Use metal tweezers to short the .

Recovers hard-bricked devices by flashing the initial bootloader images.