Choose which channels the radio should cycle through when the scan function is activated.
This pulls the current frequency map and settings into the software. as a backup before you edit anything. 4. Editing Frequencies and Features
This guide covers everything you need to know about the , the hardware required, and the step-by-step process to get your radios configured. Why Use Programming Software for the TC-320?
If the software won't open, try right-clicking the program and selecting "Run as Administrator" or using Compatibility Mode for Windows 7. Conclusion
Ensure the radio is turned ON . Also, check that the cable is pushed firmly into the Mini-USB port; some protective cases or dust covers can prevent a flush connection.
Here you can enter the RX (Receive) and TX (Transmit) frequencies.
Connect the programming cable to a USB port on your computer. Plug the Mini-USB end into the side of the TC-320. and set the volume to about 50%. 2. Identify the COM Port
Tweak power consumption to extend your shift life. Prerequisites: What You’ll Need
In the HYT software, go to and select the matching COM number. 3. Read the Current Data
Look under to see which port is assigned to your cable (e.g., COM3).
Choose which channels the radio should cycle through when the scan function is activated.
This pulls the current frequency map and settings into the software. as a backup before you edit anything. 4. Editing Frequencies and Features
This guide covers everything you need to know about the , the hardware required, and the step-by-step process to get your radios configured. Why Use Programming Software for the TC-320? hyt tc-320 programming software
If the software won't open, try right-clicking the program and selecting "Run as Administrator" or using Compatibility Mode for Windows 7. Conclusion
Ensure the radio is turned ON . Also, check that the cable is pushed firmly into the Mini-USB port; some protective cases or dust covers can prevent a flush connection. Choose which channels the radio should cycle through
Here you can enter the RX (Receive) and TX (Transmit) frequencies.
Connect the programming cable to a USB port on your computer. Plug the Mini-USB end into the side of the TC-320. and set the volume to about 50%. 2. Identify the COM Port If the software won't open, try right-clicking the
Tweak power consumption to extend your shift life. Prerequisites: What You’ll Need
In the HYT software, go to and select the matching COM number. 3. Read the Current Data
Look under to see which port is assigned to your cable (e.g., COM3).