Installml.com Setup Now

Look for a network named (where X is a series of numbers).

Double-check your Wi-Fi password. Ensure the network is 2.4GHz, as some older models do not support 5GHz.

Reset the generator controller and re-enable "Set Up Wi-Fi". installml.com setup

Connect to this network. Your phone may warn you that there is no internet connection; this is normal—stay connected to the MLG network. 3. Access the InstallML Portal Open a web browser on your phone and go to installml.com .

is the official setup portal for Generac Mobile Link devices. It is used to connect Generac home standby generators to a local Wi-Fi network, allowing homeowners to monitor their generator's status, receive maintenance alerts, and view battery levels remotely via the Mobile Link app . Look for a network named (where X is a series of numbers)

The setup process involves connecting your smartphone to the generator’s temporary Wi-Fi signal and then bridging that connection to your home network. Pre-Setup Checklist Before starting, ensure you have the following:

A registered account on the Mobile Link website or app. Step-by-Step setup Guide 1. Enable "Set Up Wi-Fi" on the Generator Go to your generator’s control panel. Use the arrow keys to navigate to SYSTEM . Find the WIFI or SET UP WIFI menu and press ENTER . When prompted with "SET UP WIFI? Yes," press ENTER again. Reset the generator controller and re-enable "Set Up Wi-Fi"

Have your Wi-Fi SSID (network name) and password ready.

For further assistance, you can visit the Generac Support Knowledge Base for detailed manuals. Complete Setup