Jungheinrich Eje 120 Error Code 4372 Work ~upd~ ✰ [ PREMIUM ]

: The traction sensor in the tiller head may be sending a signal that it is slightly "active" even when the handle is at rest.

Check harness and tiller head connections with a multimeter. Replace the traction sensor or the entire tiller head. jungheinrich eje 120 error code 4372 work

If the error persists after a restart, the traction sensor (located in the drawbar/tiller head) may be damaged or out of adjustment. : The traction sensor in the tiller head

If the sensor is confirmed faulty and calibration/updates do not work, the tiller head assembly or the specific internal card may need replacement. Quick Summary Table Likely Fault Recommended Action Out-of-range sensor If the error persists after a restart, the

Troubleshooting Jungheinrich EJE 120 Error Code 4372 On the , error code 4372 indicates a lack of a neutral zone in either the drive or lift/lower functions . This most commonly points to a fault or miscalibration in the tiller head traction sensor . Core Cause: The "Neutral Zone" Issue

Inspect wire connections within the tiller head for signs of wear or breakage.

This error is often triggered when the truck's control system cannot find a stable zero or "neutral" position for the travel or hydraulic switches.