Liz Ocean Wsg 32 Install -

This guide provides a comprehensive walkthrough for installing the WSG 32 system. Pre-Installation Checklist

💡 Check the brine tank monthly and keep it at least one-third full.💡 Sanitize: Use a water softener cleaner once every six months to remove iron and resin buildup.💡 Check Bridge: Occasionally break up any "salt bridges" (hard crusts) that form in the brine tank.

Before beginning the installation, ensure you have the necessary tools and have selected an appropriate location. liz ocean wsg 32 install

To keep your LIZ Ocean WSG 32 running for years, follow these simple steps:

Turn off the main water supply to the house. To keep your LIZ Ocean WSG 32 running

Inspect every joint. If a leak is found, shut off the water immediately and tighten the fitting. Power Up: Plug the WSG 32 into a dedicated GFI outlet.

Leave at least 6 inches of clearance around the unit for future maintenance. Step 1: Prepare the Plumbing Power Up: Plug the WSG 32 into a dedicated GFI outlet

The WSG 32 must be integrated into your main water line. Safety is the priority during this phase.

Connect the smaller tubing from the brine tank to the brine well on the control valve. Ensure the nut is finger-tightened, then given an extra quarter turn with a wrench. Step 4: System Startup and Programming

Pipe cutter, adjustable wrenches, Teflon tape, and soldering equipment (if using copper pipes).