Digital and analog interfaces for easy integration. ⚠️ Safety Protocols
If ozone concentration drops, check for a clogged inlet filter.
Connect the "Cooling In" and "Cooling Out" ports. Use deionized (DI) water or chilled process water. 2. Electrical Wiring mks astron 2l manual
Run oxygen through the cell for 5 minutes to clear moisture.
According to the technical manual, setup follows these specific steps: 1. Plumbing Connections Connect ultra-high purity (UHP) Oxygen. Gas Outlet: Use stainless steel compression fittings. Digital and analog interfaces for easy integration
Ensure all downstream tubing is ozone-compatible (e.g., Teflon/PFA, 316L Stainless Steel).
If the unit shuts down unexpectedly, check your cooling water temperature and flow rate. Are you dealing with a specific error code ? Do you need help integrating it with a PLC? Use deionized (DI) water or chilled process water
The chassis must be grounded to prevent static discharge. 🚀 Installation & Setup
Activate the RF generator via your control interface.
Always use an ambient ozone monitor in the room.