Regardless of the version, the game offers a unique "rock-paper-scissors" combat system that is highly praised for its tactical simplicity.
For fans of the classic Wuxia genre, is a nostalgic gem from the PlayStation 1 era. Released by Sony Computer Entertainment in 2000, it remains one of the few high-budget RPGs specifically developed to cater to the Chinese-speaking market. When players discuss whether the Chinese ISO is better than the Japanese counterpart, the consensus leans heavily toward the Chinese version for several key reasons. Why the Chinese ISO is Often Considered "Better"
: For a late-stage PS1 game, it features impressive FMV cutscenes and 3D environments that bring the 12th-century Jin-Song war to life. Final Verdict for Players Regardless of the version, the game offers a
If you are looking for the definitive experience, the is superior because it aligns with the cultural and linguistic roots of the source novel. While it is a relatively short RPG—clocking in at roughly 20 hours —it offers a level of immersion for Wuxia fans that the Japanese version simply cannot match due to the language barrier. Shachou Eiyuuden: The Eagle Shooting Heroes (PS1) : r/JRPG
: Combat revolves around three skill types: Wai Gong (Physical/Red), Qing Gong (Lightness/Blue), and Nei Gong (Inner/Yellow). Wai Gong beats Qing Gong. Qing Gong beats Nei Gong. Nei Gong beats Wai Gong. When players discuss whether the Chinese ISO is
: The Chinese ISO features full Chinese voice acting for main characters, minor characters, and even NPCs. For a game based on Jin Yong’s iconic novel, hearing the techniques and dialogue in their original linguistic context is a major draw.
The primary argument for the Chinese ISO is its , which isn't just about text, but also the immersive audio experience. While it is a relatively short RPG—clocking in
: A "Potential" mechanic allows characters to trigger random effects in battle, and players can teach Guo Jing and Huang Rong up to ten different habits to customize their performance.
[ 35HD-NAS-E ] MRT GigaNAS 35HD-NAS-E 3.5" SATA Single Bay NAS (gemini) ================== !!! IMPORTANT NOTICE !!! ================== This firmware image is compatible with factory bootloader only ============================================================== Product specification: Vendor: MRT Communication Ltd. CPU/SoC: Cortina Systems/Storlink devices CS3516/SL3516 (FA526) @ 300MHz (ARM) Memory: 64 MiB (DDR1 SDRAM) Flash size: 16 MiB (Parallel NOR): 3 MiB for kernel and 6+6 MiB for rootfs (1 MiB misc: boot, VCTL, FIS, config) Bootloader: Storlink Boot Loader (zImage) Ethernet ports: 1 x 1000 Mbps (PHY: Marvell 88E1111) Wireless: None MiniPCI slots: None USB ports: 1 x USB 2.0 (back side) Input voltage: 12V DC / 2A via Philmore 258 Barrel Plug, Type: Adaptaplug N (Polarity: Center positive wiring) RTC battery: CR2032 / 3V lithium battery UART settings: 19200 baud, 8-N-1 mode (TTL compatible logic levels) UART pinout: JP4 / Vcc (3.3V): 1, RX: 2, TX: 3, GND: 5. Device alias: Multicase HD-35SN ============================================================== NOTICE: This image works with the official package repository. ============================================================== Files: - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-zImage.img LZMA kernel (parition: Kern), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-bootlog.txt device bootlog (dmesg), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-squashfs.img squashfs filesystem (parition: Ramdisk), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-sysupgrade.tar.gz sysupgrade image, - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-packages.txt packages list (opkg list-installed), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e.md5 MD5 checksum. ========= CHANGELOG ========= Chaos Calmer 15.05.1 (r48532) - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e* - 2018-03-14 ------------------------------------------------------------------------------------------- [UPD] Updated to Openwrt Chaos Calmer v15.05.1 (r48532), [NEW] Darkmatter theme for LuCI added. Chaos Calmer 15.05 (r46767) - openwrt-gemini-mrt-35hd-patafix+jp3-led* - 2016-07-30 ----------------------------------------------------------------------------------- [FIX] Memory size modified to 64MB, [MOD] The device has no Machine ID so it uses ID of Raidsonic NAS4210-B: 0x1fff (8191), [NEW] JP3 (GPIO #14) unsoldered LED pin support added (mrt35hd:jp3:hdd -> idedisk), [FIX] Default trigger changed for JP3 pin: idedisk (kernel based), [FIX] ATA Channel #1 disabled, [NEW] Kernel modules compiled into the kernel: leds-gpio, ledtrig-ide-disk. [FIX] Sysugrade and ramdisk image published and firmware size fixed (hddapp removed), [NEW] Necessary kernel modules and packages added to rootfs image. [ FIRMWARE SUMMARY ] Kernel version: 3.18.23 Image format: zImage (LZMA) Rootfs Type: SquashFS Build server: itsuki.dev.dtech.hu Build host: Debian GNU/Linux, Version 7.0 Latest build: 2018-03-14 Status: PRODUCTION TEST RESULT: OK