Power off your device completely. Run the Auth Bypass Tool on your PC. Click on the "Bypass" or "Disable Auth" button. Connect your phone to the PC while holding the Volume Up and Volume Down buttons simultaneously (the specific key combo may vary by model).
First, download the latest version of SP Flash Tool and extract the contents to a folder on your desktop. You will also need the "Auth Bypass Tool." Modern MediaTek chips use a secure boot architecture that blocks SP Flash Tool from communicating with the device without an authorized account. An Auth Bypass tool mimics this authorization locally. sp flash tool unlock bootloader
With the addresses entered, click the "Start" button in SP Flash Tool. Reconnect your device (ensure the Auth Bypass is still active). The process takes only a few seconds. A green checkmark or a "Format OK" window will appear, indicating the configuration partition has been modified to an unlocked state. Step 5: Verify the Bootloader Status Power off your device completely
To verify through software, enable "Developer Options" in your settings, then check the status of "OEM Unlocking." Alternatively, connect the device in Fastboot mode and run the command fastboot getvar unlocked from your PC terminal. Troubleshooting and Safety Connect your phone to the PC while holding
Battery level maintained above 50% to prevent power failure during the flash. Step 1: Prepare the SP Flash Tool Environment